Low Tech: A Words of Wisdom Generator

Levers, pulleys, widgets, computers, and other gearhead talk.

Moderators: happywaffle, arclight

Low Tech: A Words of Wisdom Generator

Postby Andreas Fabis » September 14th, 2013, 7:20 pm

Hi there...

For a while now I have been thinking about building a machine and finally I came up with plans to build a mechanical "Words of Wisdom" generator. I knew I wanted to have a coin slot, so I could give it a little carnival feel to it and also to make the "wisdom" more valuable. And I knew I wanted to build it within a suitcase and then hang it somewhere.

After a lot of research and several technological setbacks (servo motors don't spin all the way, stepper motors are a nightmare to control if there is more than one involved) I finally had all the parts together.

Image
Last edited by Andreas Fabis on September 14th, 2013, 7:26 pm, edited 1 time in total.
User avatar
Andreas Fabis
 
Posts: 131
Joined: April 22nd, 2008, 2:15 pm
Location: Austin, TX

Low Tech: A Words of Wisdom Generator #2

Postby Andreas Fabis » September 14th, 2013, 7:21 pm

The different sentences that would form the final Words of Wisdom are printed on rolls of stiff paper:
Image
User avatar
Andreas Fabis
 
Posts: 131
Joined: April 22nd, 2008, 2:15 pm
Location: Austin, TX

Low Tech: A Words of Wisdom Generator #3

Postby Andreas Fabis » September 14th, 2013, 7:30 pm

I ordered the coin slot from the internet. It takes quarters and closes the circuit when the coin drops successfully.
Image
The sides of the suitcase are made from four layers of thick cardboard and were tricky to cut. A carpet knife with a fresh blade did the trick.
Image
User avatar
Andreas Fabis
 
Posts: 131
Joined: April 22nd, 2008, 2:15 pm
Location: Austin, TX

Low Tech: A Words of Wisdom Generator #4

Postby Andreas Fabis » September 14th, 2013, 7:32 pm

The motors with the paper rolls will be bolted to a wooden frame:
Image
I had to try several different configurations before I came up with the one that would allow for all the components to fit and move freely.
Image
User avatar
Andreas Fabis
 
Posts: 131
Joined: April 22nd, 2008, 2:15 pm
Location: Austin, TX

Low Tech: A Words of Wisdom Generator #5

Postby Andreas Fabis » September 14th, 2013, 7:38 pm

Attaching anything to the motor shaft of a little 5 Volt DC motor is tricky. I used the wedge method and drilled a little hole in the plastic cap that will be one end of the tube. Then wedged the motor shaft through and hot glued the whole thing together. The paper rolls are very light, so the torque won't be a problem.
Image
The other side of the tube just needs a shaft. I attached felt coasters on both side of the plastic cap, stuck a nail through and hot glued everything together again.
Image
The I assembled the pieces and tested the motors. Everything works. The paper rolls are wedged onto the plastic cups. I didn't use glue so I can exchange the rolls in the future.
Image
User avatar
Andreas Fabis
 
Posts: 131
Joined: April 22nd, 2008, 2:15 pm
Location: Austin, TX

Low Tech: A Words of Wisdom Generator #6

Postby Andreas Fabis » September 14th, 2013, 7:42 pm

Now it was time to cut the slots into the front of the suitcase. These are the windows through which you can see the sentences on the paper rolls. I did a LOT of measurements, because there was really one opportunity to do this right...
Image
I printed a template to make sure everything would fit and marked the windows on the front with Sharpie.
Image
Then it was time to cut...
Image
And it came out alright:
Image
User avatar
Andreas Fabis
 
Posts: 131
Joined: April 22nd, 2008, 2:15 pm
Location: Austin, TX

Low Tech: A Words of Wisdom Generator #7

Postby Andreas Fabis » September 14th, 2013, 7:45 pm

I tested the position of the paper tubes and motors and made a lot of little adjustments to find the right spot for each.
Image
Finally I bolted the motors to one of the wooden beams. If the paper tubes look smaller now, it's because they are. I had to shorten them considerably to make it all fit. Luckily I didn't have to get rid of any of the texts.
Image
User avatar
Andreas Fabis
 
Posts: 131
Joined: April 22nd, 2008, 2:15 pm
Location: Austin, TX

Low Tech: A Words of Wisdom Generator #8

Postby Andreas Fabis » September 14th, 2013, 7:49 pm

I assembled everything screwed the wooden frame together and closed suitcase. Phew.
Image
I wanted metal frames around the holes in the front, but I couldn't find any in the right size. So I got balsa wood, could them out and painted them with acrylic bronze paint.
Image
I think it will work fine. I am thinking about adding some little bronze screws just for effect.
Image
User avatar
Andreas Fabis
 
Posts: 131
Joined: April 22nd, 2008, 2:15 pm
Location: Austin, TX

Low Tech: A Words of Wisdom Generator #8

Postby Andreas Fabis » September 14th, 2013, 7:55 pm

The painted frames have dried. They are a little bit too golden for my taste. I will dust them with black spray paint.
Image
User avatar
Andreas Fabis
 
Posts: 131
Joined: April 22nd, 2008, 2:15 pm
Location: Austin, TX

Re: Low Tech: A Words of Wisdom Generator

Postby JenP » September 14th, 2013, 8:26 pm

Dude, this is awesome. You are a handy, handy man!
User avatar
JenP
 
Posts: 17
Joined: August 16th, 2011, 9:44 am
Location: Austin, TX (Jennifer Paine)

Re: Low Tech: A Words of Wisdom Generator

Postby Ruby W. » September 14th, 2013, 8:54 pm

Incredible!!!!!!! We do Words of Wisdom all the time at the Hideout! Can this be at the Hideout????????
Ruby W.
 
Posts: 578
Joined: November 21st, 2010, 11:54 pm

Re: Low Tech: A Words of Wisdom Generator

Postby valetoile » September 14th, 2013, 10:15 pm

Wow!
Parallelogramophonographpargonohpomargolellarap: It's a palindrome!
User avatar
valetoile
 
Posts: 1421
Joined: August 15th, 2005, 1:31 am
Location: Austin

Re: Low Tech: A Words of Wisdom Generator

Postby Jennifer3001 » September 15th, 2013, 11:56 am

I can't wait to try it out! Saving quarters now.
Jennifer Brinlee
Hideout Levels 1-6
Played: Student Showcases, Maestro RAW, Maestro, Theatresports, Ice Cream Sandwich & Fancy Pants
User avatar
Jennifer3001
 
Posts: 47
Joined: February 9th, 2013, 4:50 pm

Re: Low Tech: A Words of Wisdom Generator

Postby Spots » September 15th, 2013, 1:26 pm

One of the coolest DIY project thingies I've seen in a while. This is the type of thing Reddit goes crazy about too.





You just took me back to all the random word string generators I made for the GTA server I ran. Too much fun.
Image
User avatar
Spots
 
Posts: 1442
Joined: September 1st, 2009, 1:08 am
Location: New Orleans

Low Tech: A Words of Wisdom Generator #9

Postby Andreas Fabis » September 15th, 2013, 7:00 pm

I got a programmable sound chip and a little speaker and recorded the "Ahhhhhh, yesyesyesyesyesyes!". I hope it will be loud enough when it plays after the wisdom is dispensed.
Image
User avatar
Andreas Fabis
 
Posts: 131
Joined: April 22nd, 2008, 2:15 pm
Location: Austin, TX

Next

Return to Tech Talk

Who is online

Users browsing this forum: No registered users and 1 guest

cron